VPP755 Eispump Technical Specifications
- Dimensions (DxH): 60 x 53.5mm
- Cable length: 50cm
- Standard voltage: 12V DC
- Power consumption: 14W
- Permitted voltage: 8-13V DC
- Pressure at 12V: 4m water head
- Maximum flow rate: 350l/h
- Pump medium: water, water/glycol mixture
- Maximum system temperature: 65ºC
- Power connection: 4-pin molex
- Tach signal: 3-pin
- PWM signal: 4-pin
- Special feature: adjustable in five levels
- Level 1: 1800 RPM
- Level 2: 2500 RPM
- Level 3: 3200 RPM
- Level 4: 3900 RPM
- Level 5: 4500 RPM
Eisdecke Technical Specifications
- Dimensions: 80 x 80 x 40mm
- Dimensions with stands: 83 x 80 x 87mm
- Material: plexi
- Connections: 5x 1/4" threads
Scope of Delivery
- 1x Alphacool Eispump VPP755 - G1/4 IT incl. Eisdecke D5 - Plexi V.3
Removing the impeller from the ceramic shaft will cause the upper ceramic clamping ring to over-expand, which will destroy it! Removal will void the pump’s warranty!
If the pump is put together again and put back into operation, the clamping ring will loosen, which is not accepted as grounds for a return or exchange...
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Material:||Plastic, Plexi, Ceramic|
|Max. Flow:||Extreme (more than 1400l/h), 1500l/h|
|Power connector:||4Pin Molex|
|Others:||Incl. Plexi coupling|
|Dimensions:||95 x 45 x 80mm|
|Max. Discharge head:||3,7m, Good (2 to 4m)|
|Water outlet:||G1/4" inner thread|
|Water inlet:||G1/4" inner thread|
|Max. System temperature:||60° C|
|Approved fluids:||Water, Water/ glycol mixture|
|Possible control range:||8-24V DC|
Clicca qui per visualizzare questa domanda (s).