|Compatibility:||Soft tubing (PVC, Silikon, Neoprene), Stiff tubing (PUR)|
|2. Side:||G1/4" outer thread|
|1. Side:||Barbed fittings 12 & 13mm (1/2")|
Specially designed for Highflow systems, with replaceable G1/4" thread. Compatible with hoses with an inner diameter of 13mm.
Thread size: 1/4Zoll
Note for watercooling beginners:
The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Extent of delivery:
Clicca qui per vedere queste valutazioni.