- Codice articolo: 63009
- Codice produttore:
- EAN: 4049469008246
- Peso: 0,019 Kg
> 250 available in stock
Prezzo inclusa IVA più costi di spedizione
|1. Side:||Barbed fittings 10mm (3/8")|
|2. Side:||G1/4" outer thread|
|Compatibility:||Stiff tubing (PUR), Soft tubing (PVC, Silikon, Neoprene)|
10mm barb fitting made from nickel-coated brass with O-ring for PVC, PU ,PA, silicone or PE hoses with an inner diameter of 10mm. G1/4" outer threads. threads straight, SW 14.
Note for watercooling beginners:
The connectors for imperial hoses(7/16“, 3/8“, ½“) are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
10mm (3/8“) hose clamp: up to 8mm none, from 10mm up required
10mm (7/16“) hose clamp: up to 8mm none, from 10mm up required
12mm (1/2“) hose clamp: up to 11mm none, from 12mm up required
13mm (1/2“) hose clamp: up to 11mm none, from 13mm up required