Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool Eheim Power 1046-12Volt full ceramic bearing II (4m pressure head)

  • 49121
  • 15043
  • 4250197150439
  • 0,712 Kg

3 available in stock

€ 79,96 *

Prezzo inclusa IVA più costi di spedizione

Empfohlenes Zubehör
Aufpreis
Phobya external PSU 230V to 4Pin Molex 34 Watt including Euro/UK plug
1x
Phobya external PSU 230V to 4Pin Molex 34 Watt including Euro/UK plug
€ 18,54*
Alphacool decoupling kit Eheim/Hydor/Laing cover 4 decouplers
1x
Alphacool decoupling kit Eheim/Hydor/Laing cover 4 decouplers
€ 4,81*
Universal pump mounting socket (Eheim, Phobya, Laing)
1x
Universal pump mounting socket (Eheim, Phobya, Laing)
€ 12,30*
Alphacool 1046 Eheim outlet adaptor to 13/10mm - Chrome
1x
Alphacool 1046 Eheim outlet adaptor to 13/10mm - Chrome
€ 5,83*
Alphacool 1046 Eheim outlet adaptor to 13/10mm - Deep Black
1x
Alphacool 1046 Eheim outlet adaptor to 13/10mm - Deep Black
€ 5,83*
Alphacool 1046 Eheim outlet adaptor 90° to 13/10mm - Chrome
1x
Alphacool 1046 Eheim outlet adaptor 90° to 13/10mm - Chrome
€ 2,04*
Alphacool 1046/1048 Eheim inlet adaptor to 13/10mm - Chrome
1x
Alphacool 1046/1048 Eheim inlet adaptor to 13/10mm - Chrome
€ 5,83*
Alphacool 1046/1048 Eheim inlet adaptor to 13/10mm - Deep Black
1x
Alphacool 1046/1048 Eheim inlet adaptor to 13/10mm - Deep Black
€ 5,83*
Alphacool 1046/1048 Eheim inlet adaptor 90° to 13/10mm - Chrome
1x
Alphacool 1046/1048 Eheim inlet adaptor 90° to 13/10mm - Chrome
€ 9,53*
Alphacool 1046/1048 Eheim inlet adaptor 90° to 13/10mm - Deep Black
1x
Alphacool 1046/1048 Eheim inlet adaptor 90° to 13/10mm - Deep Black
€ 9,53*
Ricevi uno sconto con questo bundle
Alphacool Eheim Power 1046-12Volt Vollkeramiklagerung II (4m Förderhöhe) 1x
Alphacool Lighttower All-in-One Reservoir - Black 1x
Invece di € 131,21 * (4% gespart) Prezzo per tutto: € 125,96 *
Technische Details und Videos... mehr
Dettagli tecnici
Approved fluids: Water, Water/ glycol mixture
Color: black
Dimensions: 145 x 75 x 103 mm
Manufacturer: Alphacool
Material: Plastic, ceramic
Max. Discharge head: 4m, Extreme (more than 4m)
Max. Flow: 300l/h, Standard (smaller than 500l/h)
Max. System temperature: 35° C
Others: Incl. Converter card
Power connector: 4Pin Molex
Power input: 5W
Voltage: 12V DC
Water inlet: G3/8" inner thread
Water outlet: G1/8" inner thread
Video
This high performance ceramic rotary pump is designed for uncompromising 24/7 operation. A...altro
Informazioni prodotto

This high performance ceramic rotary pump is designed for uncompromising 24/7 operation. A variable base plate of the unit provides many mounting options for maximum flexibility. The Eheim 1046 pump is the ideal “motor” for your water cooling system: It is compact, has proven itself over many years, runs smoothly and quietly and is extremely reliable. With some modifications it is possible to gain even more performance and add more feature to this pump. Alphacool has created a converter card to implement many useful features, which will be explained in detail in the following: Alphacool’s proven

DC/AC converter card is now updated and combined with the Eheim 1046 pump!

The latest generation of the power converter card, Alphacools converter card V.2 – 12V DC to 12V AC – Double power (redundant), converts the 12V direct current from the system power supply into 12V alternating current for different pumps. Some examples of 12V AC pumps are e.g. the Eheim 1046, 600 or 1000 models.

Alphacool would not be Alphacool, if an update would not bring some extremely interesting new features! The following list shows the new features of this power converter card:

1 or 2 pump operation:
Two channels for pump connection are available. Each channel can handle up to 23W of power consumption. This means that with pumps consuming less than 11W of power per piece, 4 pumps, 2 per channel, can be connected!

As a rough guideline:
2 pumps per channel possible: Eheim 1046 or 600
1 pump per channel only: Eheim 1000

Providing only power to the pumps is something that the predecessors of this converter card were already able to do. The special feature of this card are the different operating modes which can be activated by placing jumpers on the card:


Redundant
For this mode of operation two pumps are required. Normally only pump 1 will be used, but if it fails pump 2 will be activated
Parallel
In this mode both channels are activated simultaneously
Freq. 55
Determines the frequency of AC pumps. Standard is 50Hz, at 55Hz some pumps run more smoothly and with higher flow rates
Freq. max.
Tests the maximum frequency of the pump and sets it as the operating frequency. This runs the pump at maximum power
Venting
Pump is run in venting mode for de-aeration oft he cooling loop. The pump will be switched On and Off repeatedly
Development
This is a 3-Pin extension connector. An interface to the Aquastream pump is planned here.

Pump speed monitoring:
With the help of this 3-Pin connector and a cable for connection, the fan speed can be monitored by a controller.

Temperature sensors
Here the temperature sensors can be connected. Use only sensors with a resistance of 10 kOhms. Monitoring is possible e.g. with the Heatmaster 2, later also with Aquacomputer products.

Heatmaster 2:
With the help of an interface, the HM2 Bus, this power converter card can be connected to the Heatmaster. After software version 1.02 this connection will be unlocked.

Mounting
In the corners of the board openings are implemented. With the decoupling kit, Item No. 13505,  the board can be mounted directly below an Eheim 1046 pump, allowing mounting without the need for additional space.
Alternatively the board can also be mounted with Alphacool’s Velcro mat, Item No. 13700, anywhere in the system.

Technical specifications power converter:
Material: Plastic/Metall
Colour: Mainly green
Dimensions (L x W x H): 75 x 77 x 17mm
Input voltage: 12V DC
Power connection Input: 4Pin Molex
Output voltage: 12V AC
Power connection outside: Clamping screws (like on luster terminal:
Hole dimensions: 63 to 67mm

Technical specifications pump:
Flow rate: 300 l/h
Pressure head: Up to 4m (controllable via the converter card at Freq. Max)
Power consumption: 5 W
Dimensions (L x W x H): 145 x 75 x 103 mm
Ceramic shaft and ceramic bearing

The Multi-lingual mounting manual can be found here .

Extent of delivery:
1x Eheim 1046-12Volt full ceramic bearing pump
1x Decoupling kit
1x Alphacool converter card V.2 - 12V DC to 12V AC - (Double Power & Redundant)
2x Jumper Mounting manual (GER, EN, FRA)

Premi
Questions & Answers more
Questions & Answers
No question has been asked yet.

Do you have a question?

Hinweis: Ihre Frage wird öffentlich einsehbar sein und kann - neben unserem Support - auch durch ein Mitglied unserer community beantwortet werden. Sie können Ihren öffentlich sichtbaren Namen und Ihre Email Benachrichtigungen in Ihrem Kundenkonto konfigurieren.
Leggi e scrivi una recensionealtro
Recensioni
5 Sterne:
(0)
4 Sterne:
(0)
3 Sterne:
(0)
2 Sterne:
(0)
1 Sterne:
(0)
Mayhems Pre-Mix X1 UV Red 1000ml Mayhems Pre-Mix X1 UV Red 1000ml
Contenuto 1000 ml
€ 9,02 *
Phobya ZuperZero Pure Water 1000ml Phobya ZuperZero Pure Water 1000ml
Contenuto 1000 ml
€ 9,02 *